Campbell-scientific Redwing100 CDMA Cellular Digital Modem Bedienungsanleitung PDF herunterladen (Seite 7)

Redwing 100 AirLink CDMA Modem

5. Enter the MDN.

6. Enter the MIN.

7. Press the “Start” button to program the phone.

3.3 Setup LoggerNet

1. Select Add Root | TapiPort.

2. Add a TapiRemote to the TapiPort.

3. Add a datalogger to the TapiRemote.

4. On the TapiPort page, select your installed modem on the Tapi Line.

5. On the TapiRemote un-check “Use Tapi Dialing Properties.“

6. Enter the phone number of the CDMA phone.

7. Apply the changes and test.

If you have a black SC12 cable, that is not Rev 1 or newer, it is a

CS I/O cable only and will not work for RS-232. Connect the

black SC12 cable between the datalogger and the SC932A. Use

a 9-pin serial cable or a blue ribbon cable between the phone and

the SC932A.

NOTE

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Keine Kommentare

Campbell-scientific Redwing100 CDMA Cellular Digital Modem Bedienungsanleitung Seite 7