Campbell-scientific AP200 CO2/H2O Atmospheric Profile System Bedienungsanleitung Seite 40
- Seite / 120
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
AP200 CO
2
/H
2
O Atmospheric Profile System
5.3.2 Intake Heater Cables
The AP200 intake assemblies have a small heater in the rain diverter to prevent
condensation. Power for these heaters is available in the AP200 system
enclosure. Campbell Scientific pn 9922 cable or equivalent is recommended
for connecting the intake assemblies to the system enclosure. The system is
designed to daisy-chain the heater cables from one intake assembly to the next
as described below and shown in FIGURE 5-16.
Make sure power is disconnected from the AP200 before
connecting the heater cable.
To bring cables into the AP200 enclosure, remove the cap from the cable
feedthrough by loosening the thumbscrew and twisting the cap while pulling it
off. See FIGURE 5-11.
FIGURE 5-11. Cable feedthrough cap shown removed to admit cables
into the system enclosure
Insert the heater cable through the feedthrough, and connect it to the DIN rail
bus in the system enclosure. The red, positive wire connects to one of the
terminals labeled Intake Heater +. Connect the black, negative wire to one of
the terminals labeled G, as shown in FIGURE 5-12. Two connections are
provided for convenience if multiple cables are to be connected (for example, if
the intake assemblies are mounted on two separate towers).
NOTE
28
- INSTRUCTION MANUAL 1
- Limited Warranty 3
- Assistance 4
- Precautions 5
- Figures 9
- Table of Contents 12
- AP200 CO 13
- O Atmospheric Profile 13
- 3. Initial Inspection 14
- 4. Overview 14
- 4.1.2 Optional Components 16
- 4.1.3 Common Accessories 18
- 4.1.4 Other Accessories 21
- 4.1.5 Support Software 21
- 4.1.6 Replacement Parts 22
- 4.2 Theory of Operation 23
- 4.2.1 Intake Assemblies 25
- Ambient Pressure (kPa) 26
- 4.2.2 Valve Manifold 27
- 4.2.3 Pump Module 28
- 4.3 Specifications 30
- 5. Installation 32
- 5.1.2 AP200 Enclosure 33
- 5.1.3 Intake Assemblies 33
- 5.2 Plumbing 35
- 5.2.2 Zero and CO 37
- 5.2.3 H 38
- 5.3 Wiring 39
- 5.3.2 Intake Heater Cables 40
- 5.3.3 Power 44
- 5.4 Configure the Program 46
- 5.4.2 Compile Switches 49
- 5.6 Verify Performance 50
- 5.6.3 On-site System Checks 51
- 6.1 Automatic Zero and Span 52
- 6.2 Manual Zero and Span 53
- 6.2.2 Do CO 54
- 6.2.3 Do CO 55
- 6.2.4 Do H 56
- 7.1 Plumbing Leaks 58
- 7.2 Enclosure Desiccant 59
- 7.3 Intake Filters 59
- 7.4 LI-840A (IRGA) 62
- 7.4.2 Configuring the IRGA 63
- 7.5 Zero/Span Flow 64
- 8. Repair 65
- CONFIG CO2_SPAN_PPM ppm CO 79
- Appendix D. Output Tables 81
- Appendix H. Using Swagelok 105
- Fittings 105
- Back ferrule 107
- Front ferrule 107
- Pf 101046.30007.1 111
- J.1 Introduction 113
- J.2 Removal 113
- J.3 Installation 116
Verwandte Produkte und Handbücher für Messgeräte Campbell-scientific AP200 CO2/H2O Atmospheric Profile System
Messgeräte Campbell-scientific CHP1 Pyrheliometer (from Kipp & Zonen) Bedienungsanleitung
(23 Seiten)
(23 Seiten)
Messgeräte Campbell-scientific CDM-VW300 Series Dynamic Vibrating-Wire Analyzer S Bedienungsanleitung
(122 Seiten)
(122 Seiten)
Messgeräte Campbell-scientific CMP6-L, CMP11-L, and CMP21-L Pyranometers Bedienungsanleitung
(42 Seiten)
(42 Seiten)
Messgeräte Campbell-scientific CM6/CM10 Tripod Weather Station Installation Bedienungsanleitung
(68 Seiten)
(68 Seiten)
Messgeräte Campbell-scientific CPEC200's EC155 Gas Analyzer's Packing I Bedienungsanleitung
(1 Seiten)
(1 Seiten)
Messgeräte Campbell-scientific CPEC200 Closed-Path Eddy-Covariance System Bedienungsanleitung
(112 Seiten)
(112 Seiten)
Samsung DX6411QUU/A02 podręczniki
Instrukcje obsługi i podręczniki użytkownika dla Akcesoria do parzenia kawy Samsung DX6411QUU/A02.
Dostarczamy 1 pdf podręczników Samsung DX6411QUU/A02 do pobrania za darmo według typów dokumentów: Instrukcja Użytkownika
Kommentare zu diesen Handbüchern