Campbell-scientific CS700 Tipping Bucket Rain Gage and CS700H Heated R Bedienungsanleitung PDF herunterladen (Seite 37)

Appendix A. CS700H Operation

Cycle Enable

aX29!

aX29+0!

aX29+1!

– X29 Command (Only operates if “External Control” set to 1)

Get the Cycle Enable state using the aD0! Command

Set the Cycle Enable state to 0 => Heating Cycle Off

Set the Cycle Enable state to 1 => Heating Cycle On

(Changing this state forces X21 Heater Control to 0=> Off)

(This command is only available in S/W Rev 4.1 and above)

Preset / Calibrate Ambient

Temperature Sensor

aX91!

aX91+22.3!

aX91+72.1!

– X91 Command

Get the Ambient temperature sensor using the aD0! Command

Set the Ambient temperature sensor to +22.3°C (if X28 set to 0)

Set the Ambient temperature sensor to +72.1°F (if X28 set to 1)

Preset / Calibrate Funnel

Temperature Sensor

aX92!

aX92+18.6!

aX92+65.5!

– X92 Command

Get the Funnel temperature sensor using the aD0! Command

Set the Funnel temperature sensor to +18.6°C (if X28 set to 0)

Set the Funnel temperature sensor to +65.5°F (if X28 set to 1)

Set Factory Defaults

aX99+1!

– X99 Command

Set the factory defaults (only when data is +1)

A-9

1 2 ... 32 33 34 35 36 37 38 39 40 41 42

Keine Kommentare

Campbell-scientific CS700 Tipping Bucket Rain Gage and CS700H Heated R Bedienungsanleitung Seite 37