Campbell-scientific 014A Met One Wind Speed Sensor Bedienungsanleitung PDF herunterladen (Seite 10)

Met One 014A Wind Speed Sensor

4. Quickstart

4.1 Assemble and Mount the Sensor

4.1.1 Tools Required

• 5/64 inch Allen wrench (shipped with the 014A)

• 1/2 inch open end wrench

• compass and declination angle for the site

• small screw driver provided with datalogger

• UV resistant cable ties

• small pair of diagonal-cutting pliers

• 6 inch to 10 inch torpedo level

4.1.2 Assemble the Sensor

The 014A ships with the cup assembly separate from the main housing.

Assemble the sensor using the following procedure:

1. Take the cup assembly and main housing out of the shipping box (see

FIGURE 4-1).

FIGURE 4-1. 014A shipping box

2. Gently slide the cup assembly down over the shaft at the top of the

sensor until it meets the top bearing.

3. Use the 5/64 inch Allen wrench to tighten the screw on the side of the

cup assembly; tighten until snug (see FIGURE 4-2).

Main Housing

Allen Wrench

Cup Assembly

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 35 36

Keine Kommentare

Campbell-scientific 014A Met One Wind Speed Sensor Bedienungsanleitung Seite 10