Campbell-scientific BlackGlobe Temperature Sensor for Heat Stress Bedienungsanleitung PDF herunterladen (Seite 11)

BlackGlobe Temperature Sensor for Heat Stress

Mounting Ar

Pipe Clamp Slot

uts

Lock Washers

Pipe Clamps

U-bolt

Mounting Bol

FIGURE 6-1. Mounting kit components

1. Place the mounting bolt through the hole in the mounting arm as shown in

FIGURE 6-2.

2. Slide one of the lock washers against the mounting arm.

3. Thread both nuts about half way down the bolt and then slide on the last

lock washer. The hardware should be arranged as shown in FIGURE 6-2.

FIGURE 6-2. Nuts and lock washers on mounting bolt

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 31 32

Keine Kommentare

Campbell-scientific BlackGlobe Temperature Sensor for Heat Stress Bedienungsanleitung Seite 11