Campbell-scientific NL200/NL201 Network Link Interface Bedienungsanleitung PDF herunterladen (Seite 17)

NL200/201 Network Link Interface

Campbell Scientific’s LoggerNet software is used to communicate with the

dataloggers once the NL200/201 is configured properly and connected to a

network.

Bridge Mode

• Allows access to datalogger’s internal IP functionality when a peripheral

port is not accessible. For example accessing the HTTP/webpage, email,

and FTP capabilities of a CR800/850, ET107, RAWS, or CS110.

Serial Server

• Allows access to a CR10X over Ethernet (RS-232 serial server) when used

in conjunction with an RS-232 to CS I/O (ME) adapter like the SC32B or

SC105.

• Allows access to a serial sensor over Ethernet (RS-232 serial server).

• Provides an Ethernet to RF500M Base. (RS-232 serial server).

PakBus® Router

• Allows access to a CR10X-PB over Ethernet.

• Allows access to a CR200X over Ethernet.

• Allows you to connect to a PakBus® Device on the RS-232 port and a

PakBus Device on the CS I/O port using only one TCP port.

• Allows a PakBus® device on the RS-232 port and a PakBus device on the

CS I/O port to communicate with each other without routing through the

Ethernet.

• Allows multiple computers to concurrently talk to PakBus® devices

connected to the RS-232 and CS I/O ports.

TLS Proxy Server

• Adds an encrypted Ethernet network interface to a datalogger that supports

CS I/O IP (bridge mode) communications.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 59 60

Keine Kommentare

Campbell-scientific NL200/NL201 Network Link Interface Bedienungsanleitung Seite 17