Campbell-scientific NL200/NL201 Network Link Interface Bedienungsanleitung PDF herunterladen (Seite 42)

Appendix B. Cables, Pinouts, LED Function, and Jumper

B.3 Ethernet

The Ethernet 10Base-T/100Base-TX cable should be a Category 5 or better

twisted pair cable (such as Campbell Scientific part number 13658). The two

active pairs are pins 1 and 2 and pins 3 and 6. Use only dedicated wire pairs

(such as blue/white and white/blue, orange/white and white/orange) for the

active pairs.

TABLE B-3. Ethernet Pinout

Pin Function

1 TD +

2 TD -

3 RD +

4 Not Connected

5 Not Connected

6 RD -

7 Not Connected

8 Not Connected

B.4 USB

The USB cable is the supplied USB A to micro B style cable (Campbell

Scientific part number 27555). This is used only for device configuration.

TABLE B-4. USB Micro-B

Function

1 VBUS (Not Used)

2 Data -

3 Data +

4 N/C

5 GND

B.5 Power

TABLE B-5. Power In

Function

Center

7 – 20 VDC

Sleeve

Power GND

B-2

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 59 60

Keine Kommentare

Campbell-scientific NL200/NL201 Network Link Interface Bedienungsanleitung Seite 42