Campbell-scientific DCP100 GOES Data Collection Platform Bedienungsanleitung PDF herunterladen (Seite 43)

APPENDIX I. 21X PROM REPLACEMENT PROCEDURE

I-3

12. Hold the new PROM by either end as

shown in Figure I-6. Position the PROM

over the sockets with the circular notch on

the end of the PROM oriented the same

direction as the surrounding PROMs.

ItemNo 6146

ObjslNo

C

1984

FIGURE I-6. Inserting the New PROM

CAUTION: The notch must be on the right

side. Inserting the PROM in the wrong

direction can damage it.

Set the pins of the PROM on the individual

sockets and press gently. Make sure

individual pins are being inserted straight

into the socket clips and are not bending.

Gently push the PROM in until it seats fully

in the socket.

NOTE: Inspect the PROM assuring that

none of the pins have been bent or are not

in the socket.

13. Repeat steps 9 through 1 (in reverse order)

to reassemble the 21X(L).

1 2 ... 38 39 40 41 42 43 44 45 46 47 48

Kommentare zu diesen Handbüchern

Keine Kommentare